PlatinumOwner
Well-Known Member
- Joined
- March 6, 2016
- Messages
- 478
- Reaction score
- 150
- City, State
- US
- Year, Model & Trim Level
- 2016 Explorer Platinum
Ok... tried all the new settings. The DDM setting changed from 1 to zero and PDM the same. Did not enable global close. When trying to change the PDM settings, it would not write. The DDM settings did take. It did create a couple bugs when trying to open globally the driver window went down a few inches then stopped. The passenger widow went down all the way. And the auto up on the driver window now does not go up automatically. The passenger does work. Put settings back to original settings still does not work for the DD. The APMI did show the new toggle for global close.
Any idea what may have caused the auto up to stop working?
exact message when trying to write in the DDM Service procedure has been interrupted
I’m not sure what would cause that if the settings were changed back. I have seen modules act “odd” before and usually a module reset, turning off the vehicle for a while, or disconnecting the battery resolved the issue.