2WD spindle parts

[Hartman]

I'm about ready to swap in some 2WD spindles, but I'm not 100% sure that I know of all the parts I need to get them assembled.

What I have:
The spindles themselves
Dust shields
Caliper brackets (from current 4WD knuckles)
Calipers (from currect 4WD knuckles)
ABS sensors (from currect 4WD knuckles)

What I know I need to get:
2WD rotors
Inner and outer bearings
Castle nuts w/ cotter pins

Are there any other parts that I need that aren't listed? I feel like there's something that I'm forgetting but I don't know what it is?

 

[Hartman]

BUMP. Anybody with some diagrams or anything? I can't seem to find any.

 

[etc]

http://www.explorerforum.com/forums/showthread.php?s=&threadid=103111

 

[Hartman]

Those diagrams don't show the assembly of the spindle parts themselves.

I KNOW some people know about this stuff.

 

[etc]

That's why you go to the right side and take a look at the wheel bearing section, they show the removal/installation of the wheel bearings and make note of the clips/race/etc.

edit-

You probably have a haynes manual too. pg 1-30 shows and exploded view of the spindle/wheel bearing/rotor assembly for 2wd. With everything labeled.