ironTone
New Member
- Joined
- February 2, 2009
- Messages
- 4
- Reaction score
- 0
- City, State
- West Milford, New Jersey
- Year, Model & Trim Level
- 97 Explorer XLT
My first post here. I just swapped an engine in my 97 explorer 4.0 SOHC with another SOHC engine. The reason why I swapped was that the timing chain was making loud rattles. Everything before the swap worked perfect, no codes or any electrical problems.Now since the swap if I try to start it up, the ignition goes on but the starter does not crank, although I hear click from the relays. I put a new starter and solenoid and nothing, I can start it from jumping the solenoid and the engine runs as normal. the other problems I have the speedo does not work, the 4 wheel drive does not work ( the 4WD lights blink on the dash as well as the o/d light) The trans seems like it does not shift while driving. The codes that I pulled were P1747,P0500, P0715, P0705, P0743, P0750, P0755, P0760, P0765, P0720 Any help or sugestions I would really be greatful!!!