Only these ...........
Tools needed: 8mm or 5/16" socket with ratchet, and extension if preferred, and a Phillips screw driver.
Arm Rest mounting bolts, two per side.
After removing the arm rest there's one screw.
Depending upon which cup holder tray is on the console there's four screws or no screws. The black cup holder has four and the interior colored cup holder has none & is removed by just lifting up on the front of it just like you do removing the one you have now.
Once you have the cup holder removed there are two screws holding it it the floor.
Installation in the reverse You can actually remove/swap these consoles in about as much time as it took for me to upload and post these photos. So simple even a Caveman can do it .......
Both consoles mount EXACTLY the same ......... same screws, same bolts, same holes, same everything!
You do not even need to change the aluminum bracket.