HELP! need to get to work!

[Palmer7]

Turn key, one click of the starter maybe? And nothing after. I replaced the battery thinking it was that cleaned up all my grounds and still one click and nothing. I think it might be my starter is done for. Stupid question but where is it? Can someone just post a picture? I know it looks like a long metal cylinder but I'm having a rough time and I start work at 5.

 

[Turdle]

you should see it back by the oil filter area.

it hangs backwards, off the transmission. Sometimes a whack with a hammer will make it go.

 

[JDraper]

Might be your battery cables. The 91-94 were known for having internal corrosion problems. It won't be visible from the outside, but you will get a high resistance reading on the cables.

 

[Palmer7]

Didn't get too work I think it still might be my starter which I found and need to remove which I will work on tomorrow. I'm really hoping that is it though.

So how do I check for the internal corrosion? cut that sucker? or just replace the wires?

 

[arco777]

When it goes CLICK do you lose power to everything until you turn the key off and back on again? If so that's an indicator of the battery cables/connections.

Try pulling the starter and putting power to it, see if it spins over with no load on it.