98explo
Member
- Joined
- March 10, 2005
- Messages
- 31
- Reaction score
- 1
- City, State
- Midwest
- Year, Model & Trim Level
- 1998 Explorer Sport
Hey guys, i need whatever answer i can get to the name of this sensor:
I had finished installing my new transfer case on my 98 X. I get under the hood and start motor to check everything out. Notice that a a hose was not hooked up and was coming from what i believe is part of the emissions system on the exhaust manifold. The tube comes from many small tubes that come off the manifold and come into one. It runs up to a sensor mounted on the side of the intake on my 4.0L OHV. Thus it runs back out but haven't traced to see where that goes. But, the plastic nipple had melted off(cause still yet to be determined). I need to find out the name of this sensor to get a new one. Any help that will lead me in the right direction would be great.
Thanks,
James
I had finished installing my new transfer case on my 98 X. I get under the hood and start motor to check everything out. Notice that a a hose was not hooked up and was coming from what i believe is part of the emissions system on the exhaust manifold. The tube comes from many small tubes that come off the manifold and come into one. It runs up to a sensor mounted on the side of the intake on my 4.0L OHV. Thus it runs back out but haven't traced to see where that goes. But, the plastic nipple had melted off(cause still yet to be determined). I need to find out the name of this sensor to get a new one. Any help that will lead me in the right direction would be great.
Thanks,
James