Project: RangerX gets full width D44 + 8.8

[colindo94]

PM me your address and Ill send them out to you. Then Ill tell you what the shipping charge is. I should be able to fit them in a flat rate envelope.

 

[Kirby N.]

They are the same

Nope. I have run accross two styles. The holes are spaced different on them. The Radius arms and the lower coil seats are spaced different by like 3/8" or so. You should measure the holes on the arms and the holes on the seats and make sure they are the same spread.

 

[Stic-o]

The ones that are on my truck have extra holes:

 

[Kirby N.]

You drilled a new set? When I ran accross it I got all frustrated tying to figure out what I messed up to keep the bolts from threading in the holes! I worked on it for a helf hour before I eventually figured it out...

 

[Stic-o]

You drilled a new set? When I ran accross it I got all frustrated tying to figure out what I messed up to keep the bolts from threading in the holes! I worked on it for a helf hour before I eventually figured it out...

I didn't, but my bottom plates are welded annd tapped to the arms, sense they not the normal arms

 

[RangerX]

The two holes for the stock coil seats measure 1", center to center on my arms.
Colindo, do your seats have that measurement?

 

[Dannyboy]

Nope. I have run accross two styles. The holes are spaced different on them. The Radius arms and the lower coil seats are spaced different by like 3/8" or so. You should measure the holes on the arms and the holes on the seats and make sure they are the same spread.

I ran into this issue, flipping the parts driver and passenger and drilling new holes solved the issue for me.

 

[colindo94]

Ill take a look today

 

[colindo94]

I got 1" from center to center

 

[RangerX]

PM sent!

 

[FROADER]

bump :

 

[Dannyboy]

When my ranger gets pulled out of my garage his will go in. Work is super busy for me right now so I am not sure when I will get to my ranger.

So everybody cheer Matt on in this thread to get Bill in the shop next.
http://www.explorerforum.com/forums/showthread.php?t=219458

 

[spotter guy]

(OMG) Just picked up the thread, Congrads

 

[DB_1]

(OMG) Just picked up the thread, Congrads

Is the OMG for Bill doing an SAS or that you're online, or both?:

 

[RangerX]

PM me your address and Ill send them out to you. Then Ill tell you what the shipping charge is. I should be able to fit them in a flat rate envelope.

This offer still good? I sent you a PM, then totollay forgot about it.

Thanks for the bump to the head, Colin.

 

[spotter guy]

Is the OMG for Bill doing an SAS or that you're online, or both?:

Just silly joke Iz and I have going. But I am excited about bill's new make-over....

 

[IZwack]

OMG!!! Seriously Winter, I'm going to come to your house and spray paint OMG on your door.

[/hijack]