mfitz725
03 EB 4x4 4.6l making it thru in NC
- Joined
- August 1, 2007
- Messages
- 204
- Reaction score
- 15
- Location
- Albemarle NC
- City, State
- Albemarle NC
- Year, Model & Trim Level
- '03 Eddie Bauer 4.6L 4x4
I am planning on dropping the tranny pan and replacing the filter on my 99 Limited 4.0LSOHC 4x4. I was wondering if there is anything I need to know special about accessing the pan that is much different from 2wd version. I saw in one thread it was suggested to disconnect the drive shaft. The 1aAuto help video seems to make the process fairly simple but it does not indicate whether it is a 2wd or 4wd. Any help I can get trying to understand what I need to do to complete this process would be appreciated. I had planned to use my ramps to elevate the vehicle but I am completely unsure of what it might take to disconnect the drive shafts. I was hoping to just elevate the vehicle and drop the pan. I have not been under the vehicle as of yet so just don't know what to expect in order to get access to the pan. Any help you can provide will be appreciated.