will 275/65/18 fit?

[the exploder85]

im getting close to getting my spacers 2.00/1.50 (keeping it on the safe side for the balljoints) and i was wondering if i could sqeeze some 32 1/2 (basically 33s) on the X without rub. the wheels are gear alloy double pump. im choosing 18s cause not alot of people are running them with a lift and if someone is id love to see some pictures. the tires are firestone. i just need to make sure they will fit before i make the move. if they will only fit with the 2.25 spacers then ill do it. just let me know what you got and whats best for me. (again its 275/65/18)

thanks

 

[auburnfan138]

Yea that'll work

 

[JoshMcMadMac]

It depends on the offset of the wheels. With an offset no less than stock, they might fit; any closer to the control arm than that and they definitely will not work.

 

[the exploder85]

im not liking these mixed respones...

 

[Kazer]

they should fit. just get the rims with atleast 4.5" of back spacing and somewhere near +12 to -6 offest. if they still rub then just do a 1.5" body lift. if you have the minivan style running boards you might have to ditch them for the tires not to rub (tubular running boards are fine)

 

[Ronin8002]

4.5" backspace = 0 offset. Should be fine but as Kazer said you can always do the 1.5" body lift if you need a bit more clearance. I would avoid wheel spacers personally but lots of people use the hubcentric type and have no issues.

 

[Kazer]

4.5" backspace = 0 offset.

the one time i beat you on a response and i screw up.

thanks ronin. lol!

 

[04 EDGE]

My 265-75-16"s rubbed when I had 2" spacers. I now have 1.5 front and 1.25 rears. they still rub lol!

 

[Ronin8002]

Hey 04Edge with the 1.25" rear spacers do your axle shafts still hit the frame loops at full droop? Mine do with the 1.5" but so far it I haven't flexed it out enough to have them do it when driving.

 

[the exploder85]

thanks guys. and i planned on removing the running boards anyway

 

[04 EDGE]

Mine never touched but were very close!

 

[Ronin8002]

Mine never touched but were very close!

good info man, thanks!