Well I'm taking an early night off tonight from my SAS on my 99 explorer so I figure I'll start my write up on it...
My ride is a Cheery 99 Ex XLT leather interior all the bells and whistles
First off I'm doing a D30 for a few reasons...
1- Wanting to keep the ABS
2- Stock(ish) width
3- Wheel bolt pattern same
4- CHEEPER...
I know, "why not just do a 44 and get it done. Your gona wheel the thing"
Well Ya I'm gona wheel it but not that hard besides I like breaking stuff...lol...
Out back it's getting SOA, AAL, and a lincoln locker...
Gears will be (eventually) 4.56 or 4.10's will deside when the tires are bought, which will be desided on when the lift is in and I see what will look best 33's or 35's???
Springs are originally out of a YJ but thanks to Mike at Abby spring they are not stock![Wink ;) ;)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Steering is the box out of my old 91 Ex
Front drive shaft will be built at Abby spring (thanks again Mike)
All the work is being done by me with help from My good buddy Pete at Pete's little shop
(Man I love plazma cutters and Hoists) Keep in mind that the shop is not a pro auto shop but rather a back yard shop. My buddy is a computor geek and I'm a licenced auto tech for 20+ years 12 of those with Ford
T case will be out of a 96 ranger electric shift (and yes you can control it with the 99 system if you have the neutral tow option installed) I know WHY???
Pix's will follow soon (I'm taking lots)
Monday Dec 3
Did some running around and gathered some more parts. Fabbed up the front spring hanger coppying Section's design but using 2x6 3/16 steel (little lighter and plenty strong... Springs dropped off at Abby Spring. Measured up stock hights of my Ex (damn I left the #'s at Petes I'll post later). Called the dude with the D30 "Oh man it's snowing and the powers out can't get it out, call me tomorrow." Mounted the spring hanger/front cross member Put the bumper back on and calles it a night.
10 am to 9 pm
Tuesday Dec 4
More running around picked up the springs and u bolts. Called the dude with the D30 again "Oh ya I'll be at the shop later call me in the afternoon" Fab up the front shackles. Calles Dude back, now the axle I was trying to get was a D30 out of a 95 ZJ with the better steering nuckles and all. "Ya man that D30 out of the 88 XJ is out and ready for you." Um no we agreed on an axle out of a 95 ZJ I need the ABS! "Oh my boss dosn't want to part that one out yet."
Ok plan "B" get a line on one out of a 96 XJ with ABS, but a 2 hr drive away Oh well,
Back to the shop I go and start cutting. Man that first cut is a killer on a very cherry 99 Ex, but I'm either crazy or stupid cuz I think it's fun...lol...
Man I love Plazma cutters and hoists
Long day 9 am to 1 am
Wed Dec 5
Run around getting Insurance on my pimp ride 2000 Malibu so I don't have to thumb around (it's 1/2 hr drive to Petes from my place) Head out to pick up the D30 Sweet shape came with front drive shaft and purdy new brakes $100 Sweet deal...
Back to shop and did a bit mor plazma cutting and grinding bit of painting.
Called it quits early looking after the kids tonight while the wife had an epicure party (oh joy)
10 am to 4:30 pm
Tomorrow we will see I'll post more later...
Cost list:
D30 $100
Braded flex lines $30 for the 3 of them new (sweet score)
Steel $100
T-case -$450 (sold a dude my 91 case and installed it he gave me his 96 ranger case, he needed a cable speedo auto shift case I didn't)
Springs and U-bolts, (worked at Abby spring for a year and Mike is a great guy) $30
Gear oil and brake fluid Free (don't ask)...
Paint, primer, grinding disk's $25
48 Kokanee's $*&^ (price restricted by Canadian Government)...lol...![CA :ca: :ca:](/forums/../forums.old/images/flags/ca.gif)
So far I'm still in the red Cool
*Side note My 2000 Malibu is for sale if any one is interested This will be my Gear and tire money $4500 OBO*
Did I mention I want this driving by next Monday...lol...
Cheers Randy...
:exp:![Salute :salute: :salute:](/forums/../forums.old/images/smilies/salute.gif)
![Biggthumpup :thumbsup: :thumbsup:](/forums/../forums.old/images/smilies/biggthumpup.gif)
:bdrunk::ttiwwp:
My ride is a Cheery 99 Ex XLT leather interior all the bells and whistles
First off I'm doing a D30 for a few reasons...
1- Wanting to keep the ABS
2- Stock(ish) width
3- Wheel bolt pattern same
4- CHEEPER...
I know, "why not just do a 44 and get it done. Your gona wheel the thing"
Well Ya I'm gona wheel it but not that hard besides I like breaking stuff...lol...
Out back it's getting SOA, AAL, and a lincoln locker...
Gears will be (eventually) 4.56 or 4.10's will deside when the tires are bought, which will be desided on when the lift is in and I see what will look best 33's or 35's???
Springs are originally out of a YJ but thanks to Mike at Abby spring they are not stock
Steering is the box out of my old 91 Ex
Front drive shaft will be built at Abby spring (thanks again Mike)
All the work is being done by me with help from My good buddy Pete at Pete's little shop
T case will be out of a 96 ranger electric shift (and yes you can control it with the 99 system if you have the neutral tow option installed) I know WHY???
Pix's will follow soon (I'm taking lots)
Monday Dec 3
Did some running around and gathered some more parts. Fabbed up the front spring hanger coppying Section's design but using 2x6 3/16 steel (little lighter and plenty strong... Springs dropped off at Abby Spring. Measured up stock hights of my Ex (damn I left the #'s at Petes I'll post later). Called the dude with the D30 "Oh man it's snowing and the powers out can't get it out, call me tomorrow." Mounted the spring hanger/front cross member Put the bumper back on and calles it a night.
10 am to 9 pm
Tuesday Dec 4
More running around picked up the springs and u bolts. Called the dude with the D30 again "Oh ya I'll be at the shop later call me in the afternoon" Fab up the front shackles. Calles Dude back, now the axle I was trying to get was a D30 out of a 95 ZJ with the better steering nuckles and all. "Ya man that D30 out of the 88 XJ is out and ready for you." Um no we agreed on an axle out of a 95 ZJ I need the ABS! "Oh my boss dosn't want to part that one out yet."
Ok plan "B" get a line on one out of a 96 XJ with ABS, but a 2 hr drive away Oh well,
Back to the shop I go and start cutting. Man that first cut is a killer on a very cherry 99 Ex, but I'm either crazy or stupid cuz I think it's fun...lol...
Man I love Plazma cutters and hoists
Long day 9 am to 1 am
Wed Dec 5
Run around getting Insurance on my pimp ride 2000 Malibu so I don't have to thumb around (it's 1/2 hr drive to Petes from my place) Head out to pick up the D30 Sweet shape came with front drive shaft and purdy new brakes $100 Sweet deal...
Back to shop and did a bit mor plazma cutting and grinding bit of painting.
Called it quits early looking after the kids tonight while the wife had an epicure party (oh joy)
10 am to 4:30 pm
Tomorrow we will see I'll post more later...
Cost list:
D30 $100
Braded flex lines $30 for the 3 of them new (sweet score)
Steel $100
T-case -$450 (sold a dude my 91 case and installed it he gave me his 96 ranger case, he needed a cable speedo auto shift case I didn't)
Springs and U-bolts, (worked at Abby spring for a year and Mike is a great guy) $30
Gear oil and brake fluid Free (don't ask)...
Paint, primer, grinding disk's $25
48 Kokanee's $*&^ (price restricted by Canadian Government)...lol...
![CA :ca: :ca:](/forums/../forums.old/images/flags/ca.gif)
So far I'm still in the red Cool
*Side note My 2000 Malibu is for sale if any one is interested This will be my Gear and tire money $4500 OBO*
Did I mention I want this driving by next Monday...lol...
Cheers Randy...
:exp:
![Salute :salute: :salute:](/forums/../forums.old/images/smilies/salute.gif)
![Biggthumpup :thumbsup: :thumbsup:](/forums/../forums.old/images/smilies/biggthumpup.gif)
![CA :ca: :ca:](/forums/../forums.old/images/flags/ca.gif)