6" BDS Ranger Kit and Superlift SOA

[sn0border88]

After talkin to my local shop, i came upon a gold mine. He suggested that because of superlifts terrible warranty policy, and bds's no questions asked policy that i go ahead and use the front 6" kit from a ranger from BDS, and use the superlift SOA brackets on the rear. He said all this, with shocks and arm will run about $900. Does anyone know where i can buy just the superlift SOA kit, without the front kit, i think i could save some money here. has anyone done the same, or similar, or even heard of it? Any problems to expect?

 

[FROADER]

Which "arm" are you talking about for $900, the beam or the radius arm? 4 wheel parts sells the SOA kit alone.

 

[410Fortune]

Forget the SOA "kit" get yourself some spring perches and have them welded on at the proper pinion angle for the lift.

I was not aware that BDS made a 6" botl on bracket kit for the TTB???
Superlifts warranty policy and customer service are actually very good, I dont think your guy knows what he is talking about as much as you think he is.

 

[j602]

Sure he wasn't talking about an BDS IFS (Torsion bar) kit? Like 410, I wasn't aware they made a kit for the TTB.

 

[SKIN]

Are you guys talking about throwing on a different torsion bar to gain heith?

 

[FROADER]

Ya, that's why I asked what arm. Thought he was talking about a control arm when I first read it, but then saw he has a 1st gen.

 

[sn0border88]

i meant pitman arm, some kits dont include them

 

[sn0border88]

uhh, can you send me the link for the soa kit, i cant find it.