slammedxonair
Well-Known Member
- Joined
- August 4, 2002
- Messages
- 368
- Reaction score
- 1
- City, State
- vermilion ohio
- Year, Model & Trim Level
- 91 xlt 2wd
Thanks guys the rearend is kinda based off the Jaguar suspension with no UCA, I still have some adjustments to make on the lower arms to gain some negative camber but basically the shafts are locked into place and also act as the upper arm. We were originally going to use a mark viii / thunderbird rearend but the owner wanted to go this route instead. So thats what we did.
As for the body I'm not touching it at all just building the frame, doing the air ride and sending it back to the motor shop in Indy. They are doing the motor, tranny mounts a few other things and building the body mounts on the truck.
Heres the Heidts rear setup
http://www.heidts.com/index.cfm/pag...ategory_id=84/home_id=70/mode=prod/prd130.htm
As for the body I'm not touching it at all just building the frame, doing the air ride and sending it back to the motor shop in Indy. They are doing the motor, tranny mounts a few other things and building the body mounts on the truck.
Heres the Heidts rear setup
http://www.heidts.com/index.cfm/pag...ategory_id=84/home_id=70/mode=prod/prd130.htm