ranger812572
New Member
- Joined
- November 10, 2011
- Messages
- 5
- Reaction score
- 1
- City, State
- Yakima, WA
- Year, Model & Trim Level
- 94 Explorer, 76 E150
My check engine light came on. I checked the codes. It showed an EGR system code, not exactly sure which one off the top of my head. I replaced the EGR valve and DPFE. Reset the computer, and it still popped up. SO i replaced the EGR vacuum solenoid. Cleared the codes again. Still comes on. I know I am getting vacuum, because I pulled the vacuum line off the egr valve and manually pulled the throttle back to raise it up to about 1500 RPMs. I did feel it pulling, so I know its got vacuum. Any suggestions?