- Joined
- December 16, 2010
- Messages
- 3,281
- Reaction score
- 20
- City, State
- Greer, SC
- Year, Model & Trim Level
- 2001 SAS'd Sport Trac
Hey guys,
I'm designing a new transmission crossmember. So I took measurements between the frame rails where the transmission crossmember is. I measured the width inside the rails as well as the distance from inner drivers side to mounting bolts on the crossmember. Also the distance from inside the drivers rail to the passenger edge of the transfer case flange. I went to mock everything up in Solidworks and it just looks plain wrong. On top of it, I'm letting my friend borrow the ST while his Super Duty is in the shop so I can't get measurements on it.
Would someone be able to maybe take down those measurements for me so I can get this squared away? I'd be very grateful!
I'm designing a new transmission crossmember. So I took measurements between the frame rails where the transmission crossmember is. I measured the width inside the rails as well as the distance from inner drivers side to mounting bolts on the crossmember. Also the distance from inside the drivers rail to the passenger edge of the transfer case flange. I went to mock everything up in Solidworks and it just looks plain wrong. On top of it, I'm letting my friend borrow the ST while his Super Duty is in the shop so I can't get measurements on it.
Would someone be able to maybe take down those measurements for me so I can get this squared away? I'd be very grateful!