Post pictures of your truck with auxiliary lights

[Texplorer]

 

[wisekise]

here's my setup. need to get new pics of the clear corners and silverstars i just put on, but i am waiting till i get my $10 light bar done

all lit up

by the way where's the best place to get some bright-a$$ reverse lights, halogen or led's. i would like the 3156 style rather than aux. rev. lights

 

[Texplorer]

Does this count also as auxillery lighting???

 

[aldive]

here's my setup. need to get new pics of the clear corners and silverstars i just put on, but i am waiting till i get my $10 light bar done

all lit up

by the way where's the best place to get some bright-a$$ reverse lights, halogen or led's. i would like the 3156 style rather than aux. rev. lights

How are those large lights attached to the bumper?

Thanks ....

 

[wisekise]

aldive,
i used some 1/4" 4x4 steel angle, cut it down to keep the lights and brackets from rubbing the bumper and grille. i had to get longer bolts for the factory bumper holes b/c i used 1/4" steel. some pics

in this pic that bolt was temp. for fit it was way too long
i also trimmed the corners of the steel and coated them with truck bed liner-the cheap stuff not herc.
i haven't had any prob's with vibration....yet

 

[Blacksheep Josh]

Don't have a pic of them on though....

I like the Explorer emblem on the fender, actually looks pretty awesome. This is one of the cleanest and best looking 1st generations i've ever seen.

 

[Blacksheep Josh]

CBII, by the way, what size tires are those, and do you have a lift?

 

[Donner]

Just perfect!

That is a work of art! Beautiful vehicle

 

[CBII]

CBII, by the way, what size tires are those, and do you have a lift?

Thanks for the comments.

Those are 31's with next to no lift at all...just an add-a-leaf in the rear. Only thing it did was fix the saggy ass that it had prior and maybe add an extra 1/2"...and that's just a maybe. Never really measured.

 

[Paraphoe]

4 rack lights, 2 bumper mounted PIAAs, 2 bumper mounted fogs.

All lit up at night, before the new headlights:

 

[aldive]

Jason, that looks very nice.

How did you mount the bumper lights?

Thanks ...

 

[Paraphoe]

Al,

Thanks. Check out this post for the details:

http://www.explorerforum.com/forums/showpost.php?p=1876042&postcount=31

 

[Dopler174]

Notace the Hawk in the refelction of the sun. The roof lights are tucked away.

My favorite light.

 

[FROADER]

My favorite light.

Great for tailgaters!!

 

[Blacksheep Josh]

Thanks for the comments.

Those are 31's with next to no lift at all...just an add-a-leaf in the rear. Only thing it did was fix the saggy ass that it had prior and maybe add an extra 1/2"...and that's just a maybe. Never really measured.

cool, so everything still stock up front?

the 31s look bigger to me, guess it's because of the no lift. any problems rubbing at all? what width? 10?

 

[Lankhimself]

I will be posting in this thread as soon as I finish the enormous auxiliary wiring job I'm doing in my truck...It's gonna feel so good when it's finally complete.

But until then...subscribing

 

[aldive]

Finished installing these yesterday.

http://www.explorerforum.com/forums/showthread.php?p=1922106#post1922106

 

[Texplorer]

Be careful with that carr light wing, if they arent made out of metal they break when bumped by another vehicle in normal parking situations.

 

[aldive]

Be careful with that carr light wing, if they arent made out of metal they break when bumped by another vehicle in normal parking situations.

It is made from metal.

 

[Texplorer]

Ok cool, I know they were fiberglass when they first came out and I didnt know if they changed to metal or not.