Ok so finally we have relief. I got a chance to talk to a ford technician and he got me the schematic for the wiring. He showed me how to bypass this damned module. All you need to do is cut 4 wires and reconnect them. The only thing u lose is ur computer will no longer tell you that one of ur headlights is no longer working.
1. Unplug module.
2. Cut the White/Light Green wire. aka. pin 1
3. Cut the Dark Blue/ white wire. aka. pin 11
4. Soldier and heat wrap wires. from step 2-3
5. Cut Dark Blue/Light Green Wire aka. pin 12
6. Cut Dark Green/ Orange Wire. aka pin 13
7. Soldier and heat wrap wires. from step 5-6.
8. Reconnect plug with all remaining wires to Lom.
Worked perfectly for me. I assume this will help all of you that are trying to do the hid upgrade also.
The schematic is posted here also a blow up of the light out module.
http://lightsoutmodule.shutterfly.com/
1. Unplug module.
2. Cut the White/Light Green wire. aka. pin 1
3. Cut the Dark Blue/ white wire. aka. pin 11
4. Soldier and heat wrap wires. from step 2-3
5. Cut Dark Blue/Light Green Wire aka. pin 12
6. Cut Dark Green/ Orange Wire. aka pin 13
7. Soldier and heat wrap wires. from step 5-6.
8. Reconnect plug with all remaining wires to Lom.
Worked perfectly for me. I assume this will help all of you that are trying to do the hid upgrade also.
The schematic is posted here also a blow up of the light out module.
http://lightsoutmodule.shutterfly.com/