cskinner89
Well-Known Member
- Joined
- July 16, 2007
- Messages
- 101
- Reaction score
- 0
- Year, Model & Trim Level
- 93 Explorer XLT
I'm replacing all of the transmission cooler lines on my 93 XLT. I have all of them off except for that stupid return line! and in good explorer fashion, that's the only one I really needed to replace.... I've tried many Saturdays to get that flare nut off the transmission but that silly exhaust is in the way... So I realized I'm not getting that off without breaking everything else in my path. and the first foot of the line coming out of the transmission is still good as new, not a spot of rust. So I'm wondering if there's any way I can cut where the line is good and connect some new line to replace the bad stuff. I did something similar with "Unions" on the breaks to connect bubble flares to standard flares (couldn't get a bubble flare tool anywhere!) but I cant seem to find 3/8" unions. Is there any other way I can connect two 3/8" lines together? and do 3/8" unions exist?
Thanks alot!
Thanks alot!