Blackdog
Active Member
- Joined
- August 31, 2006
- Messages
- 75
- Reaction score
- 0
- City, State
- Zillah Washington
- Year, Model & Trim Level
- 2004 F-150, 2006 Ranger
While installing my lift kit I noticed something strange. The two top bolts that secure the radius arm (the ones that also secure the bottom of the coil spring), I found the drivers side had a big washer under the bolt and and the pass side had none. I have another set of axles and they are setup the same way. Why did Ford do this? Thanks.