Xeek's '91

[Xeek]

sway bar and pb blaster is done, i need another can now tho.

im still safe doing this on stands? the dangerous part you mentioned is with trying to yank the axle out? just making sure...

 

[Xeek]

you know what.. i just need to bring my truck to your house, new parts, list of things i want done and a $500 rallys gift card lolol

 

[jd4242]

you know what.. i just need to bring my truck to your house, new parts, list of things i want done and a $500 rallys gift card lolol

Hahahahahah i do luv that place!! Damn now i want some rally frys!!!!mmmmmmmmmm numnum

 

[Xeek]

if you can hold off for 6 and half hours, you can get some! lol

 

[Xeek]

hey jd, do you happen to have the stock spare wheel? the 15x7 steelie? if so, could i get it?
im planning on getting 5 for my wheels down the road. i already have 1

 

[jd4242]

Nope and my stocks where different from yours anyways. I wouldnt run anything less than 15x10 if your going 14+ for the a 90% street truck

 

[Xeek]

damn. well 15x7 should be fine. trying to get some 32x11.5 bfgs, i think the most ill prob goto will be 33x12.5.
IF i go bigger, id be getting 37x12.5r16.5 hummer tires on 1 tons. i doubt id ever do that tho lol

 

[jd4242]

You plan on putting them on stocks? I cant stand stock wheels!! You got my old rims just put a spare on it,your never see it unless you get a tires carrier bumper!

 

[Xeek]

no not the stock wheels, the stock spare wheel.
this one:

only problem is, mine is 15x7. finding them online theyre 15x6.5, 15x6, 15x5. so im confused :/

 

[jd4242]

Idk.im going to try and be there by 11 and need to be gone by no later than 2!!! Soo be ready!!

 

[Xeek]

just need shocks, driveshaft, master cylinder and brake lines attached and ill be in business!

thank you jd!

side note, i damn near died/passed out today. bending over and holding the old axle on the jack for a 15ft trip. lightheaded, could barely see, my throat was beating, stabbing in the back of my head, went 90% deaf in both ears. all for about maybe 5min. :/

 

[jd4242]

Hahha yea for a minute there i thought i was finally going to get a chance to have you intake and valve covers!#! Haha i mean would have sucked if you died but heyy we all going to die sometime!!but your welcome! !it was freakn blazen out!!!

 

[Xeek]

lolol! i was dieing and all you could think about is taking my powder coated parts. thats why you just stared at my truck the whole time!
the MAF and water neck is powder coated also


yes it was hot as hell, prob why i was getting that way in the first place.

 

[jd4242]

Haha those tires look sooooo small and funny on the back!!

 

[Xeek]

yea, i hope non bald 32s look better, cause thats the plan!

 

[Xeek]

i think i found my brake problem jd.
http://www.autozone.com/autozone/pa...?counter=1&itemIdentifier=350425_168069_2362_

connecter looks the same. and i searched for extended lines and most people seem to just bend that bracket down on the frame, and it works.


ill try it, not sure when itd get here, autozone usually gets stuff next day
edit: nevermind! advanced has it in stock(by rallys)!!!!

 

[jd4242]

i think i found my brake problem jd.
http://www.autozone.com/autozone/pa...?counter=1&itemIdentifier=350425_168069_2362_

connecter looks the same. and i searched for extended lines and most people seem to just bend that bracket down on the frame, and it works.


ill try it, not sure when itd get here, autozone usually gets stuff next day
edit: nevermind! advanced has it in stock(by rallys)!!!!

yea looks like it..i know with my soa and a aal it was way to tight.even without the aal i think it would be to tight to 4x4 or any flexing.how much is that hose?it still might be cheaper just to go get on made,its not that far,about 20 miles round trip.so about $5 in gas and $10 for an extended line,so no more than $20 for a line that will for sure work
http://maps.google.com/maps/place?c...UTF8&ll=37.250008,-76.930389&spn=0,0&t=h&z=10

 

[Xeek]

well i bought the line, it was $22 and change. it had the correct fitting on it.
im gonna put it on and see how much slack i get. i mean i can always but the superlift extension if i have to

 

[jd4242]

well i bought the line, it was $22 and change. it had the correct fitting on it.
im gonna put it on and see how much slack i get. i mean i can always but the superlift extension if i have to

i bet you get none!!i would have just had the line made and not worried about having to buy that or buy a superlift one down the road,you have all ready spent more on it than to have it made,but heyyy dont listen to me!!

 

[Xeek]

ha! theres actually some good slack! i cant attach it to the axle tho, the old one is rusted shut onto the hard line and ive pretty much rounded that off now....
but holding it where it needs to go theres slack!