Project Double R...

[Stang5lgt]

The wood really brings it together, i like it. How far forward did you move the rear axle? And that's good to know about the jeep front shaft, thanks for posting that

I moved it forward 15 inches. I cut 18 inches off the frame. The flatbed is 4'-6" long but almost 5'-6" wide.

 

[Stang5lgt]

Got the wood part done. Had to test it out pretty comfy... LOL

 

[Stang5lgt]

I drove the truck down the street today. Only have 1st gear so didn't go too fast. But the truck drives pretty good. Pulled it into the garage and got the old slush box out. Ready for the one I picked up today. Just hoping the one I got works.

Truck sits about the same height as the Merc. When I pulled the truck into the garage I checked to see how level it was. The back is 1/2" higher then the front. So pretty happy with that.

Got the old bad tranny out.

Sliders are started.

 

[Stang5lgt]

New tranny is in and works good. The old one had about 1/4" of metal on the bottom of the oil pan poor truck. The boss wanted to take for a spin she likes it but says it needs shocks. LOL

 

[DB_1]

Man that shortened wheelbase looks good, makes me wanna do mine like that now. And that's a lot of wheel weights on that rear tire lol, they couldn't do the stick-on weights on the inside?

 

[Stang5lgt]

Man that shortened wheelbase looks good, makes me wanna do mine like that now. And that's a lot of wheel weights on that rear tire lol, they couldn't do the stick-on weights on the inside?

Thanks yeah I love this little truck getting tags for it Tues so I can start driving it next week. All I can say is Walmart mounted and balanced 8 carry in tires with new valve stems for 60 bucks. It took them 3 hours.... Thank God I dropped them off and they were like we are out of sticky weights I was like just throw them on the outside I don't care cause I am doing weld on beadlocks soon. And you can see what I got. LOL

And I already have a couple people asking if I am selling the truck...

 

[Stang5lgt]

Gears, lockers, and anti wraps today....

So pretty....

4.56 gears and Detroit installed...

1 inch lift anti wraps on...

All done...

Front axle gears and locker after lunch...

 

[Stang5lgt]

Time for some poser ****...

 

[Stang5lgt]

Oh I was so excited I almost forgot front gear pics...

Dana 30 4.56 Reverse cut high pinion gears and Detroit Truetrac helical gear traction device.

 

[Sploder94]

love this build lots of inspiration keep it up man

 

[Stang5lgt]

Thanks man I just keep pushing cause I know if I let up for a day I will loose my motivation.

While I was painting the grill I taped the Ford badge on the flatbed going to get one from the Junkyard cause I like it.

I think I will be ordering some new lenses too...

Got the LED working. I had to order LED flasher cause the turn signals just stay on(truck thinks it has burnt out bulb). Should be here later this week.

Went to the DMV to get tags for the truck turns out it has a Salvage title no biggie but I have to get the PO to sign some paper work before they transfer title. But they gave me a temp tag so I can drive it until then. That made me happy!

 

[Stang5lgt]

Got the exhaust put together, front put back on, and picked up a Ford badge for the rear here are some pics...

 

[Stang5lgt]

TNT came over today to hang out with Double R...

Got the 14" shocks on all four corners today...

 

[Stang5lgt]

Went by a friends house and flexed out on his 5th wheel...

Had people honking yelling and following me tonight in the Rock Ranger. LOL My boys were like why is everyone going crazy over the Ranger. I told them cause they like it.

 

[Stang5lgt]

Drove the truck over 100 miles today so far. Picked up some nice 2 door Explorer Sport seats for 60 bucks for the pair at my fav junk yard. Truck runs great and the AC even blows ice cold. Think it still has R12 in it. LOL Hauled a 8.8 with the truck for a customer. Pretty impressed with it so far. Not a speed demon but it can keep up with traffic without too much trouble. NO BUMP STEER at 70 mph and NO DEATH WOBBLE with my tiny track bar. And I still have not put the sway bar back on the front or rear. Truck is very stable in corners and the ride is comfy for a truck. And truck has been turning a lot of heads one guy almost ran his lawn tractor into a light pole cause he was too busy staring. HAHA

 

[yostyexplorer94]

one guy almost ran his lawn tractor into a light pole cause he was too busy staring. HAHA

Thats great! The truck looks awesome.

 

[Stang5lgt]

Thanks! Got the new Explorer seats in the truck. And wired up the power seat on the Drivers side. Pretty easy since the truck already had power lumbar. Seats are nice and comfy.

 

[FROADER]

This thing is stupid, and you should get rid of it right away. I'll PM you my address for drop off...

You and DB_1 are killing me with the rigs getting done and ready to go. I need to get some money together so I can build mine!

Any pictures of how/where you mounted the front leaf hangers? I imagine there is nothing in the way since you were able to do it. How much lift do you think you got from that as well as the 63s? I plan to shorten my wheelbase to about 115".

 

[Stang5lgt]

This thing is stupid, and you should get rid of it right away. I'll PM you my address for drop off...

You and DB_1 are killing me with the rigs getting done and ready to go. I need to get some money together so I can build mine!

Any pictures of how/where you mounted the front leaf hangers? I imagine there is nothing in the way since you were able to do it. How much lift do you think you got from that as well as the 63s? I plan to shorten my wheelbase to about 115".

LMAO!
My leafs are the 64" 3/4 ton ones they have 4 leafs. With the leafs and moving the mounts and adding 1 inch lift anti-wrap perches I scored about 7-8 inches. The 6" XJ coils in the front scored me about 7".


Here are some pics...

You can see in this pic where the leaf mount used to be.

 

[Stang5lgt]

I got the LED flasher I ordered. First I plugged it and nothing. I was like WTF is wrong with this thing. I didn't come with any instructions. So after some searching I realized that the prong marked X had to be powered. If it was GM I would be in business but Ford is backwards. So I pulled the fuse box down and reversed the pins. Works like a charm nice to have turn signals. I also fixed some more issues the PO had neglected.

Wife and I took the truck over to Sears to pick up the new Microwave we special ordered for the new kitchen. While I was waiting for them to bring the Microwave out two guys asked me what the truck used to be. I laughed and said it is Ranger. Then we were leaving a guy and his son were walking away from there Audi and son a toddler was like look dad. His dad wouldn't look but it was funny watching him tug on his arm to get him to look. Then as we cruised through the mall as we left there were a lot smiles and rubber necks. Truck is pretty cool don't think I have ever owned something that got so many looks. LOL Taking the truck to Super Cruise tomorrow night should be interesting.