conversion

Our 94 explorer xlt was converted to disk before we bought it. The e brake works like a maybe at best. You have to have it all the way down and in the right spot to have it work. It's ridiculous I don't use it much but if we have to such as air up tires or using the air compressor in general it...

I'm going to convert my auto locking hubs to manual ones, but I'm having trouble finding any conversion kits. The way I understand it the kit has the special tool I need to torque the bolts. It's a 94 XLT 4.0 L Automatic

Here are some photos of a conversion harness for Piu. It is used to convert NON-SYNC to SYNC 2/3.

Hello all, I am looking to convert my explorer to Bags, front and rear, I'm kind of looking for a strut type, and dont really know where to start, any ideas are welcome! EDIT: this is a 2001 XLT 4.0L

I have a 1991 explorer rear end and want to convert the drum brakes to disc. Is there and aftermarket bolt on mount or should I go to the junk yard and buy all the parts off a junk rear end ?

I am getting very mixed results on the topic so I figured I would post a thread before I made any purchases. I have an '07 Explorer XLT without automatic headlights, but I do have the sunload sensor on the dashboard. The fog lights turn on with the key fob in the night time and stay off in the...

Hey guys, oddball question for ya: Would it be possible to add a double cardan cv h yoke to the transfer case side of the rear drive shaft in a 1993 4 door explorer? Stay with me a second... So I did a SOA conversion, and because I didn't check my math when we welded the new perches I have...

I have a 2007 Sport Trac and I want to convert to auto headlights. I replaced the headlight switch but still no auto headlights, but they do come on after I turn the windshield wipers on. Has anyone done this conversion or have any input? I do have a sun load sensor on the dash that blinks a red...

Howdy folks I was wondering what transmission I could get to do the swap and what cuts or parts of my interior I would need to remove any links are appreciated to other threads or anything my only peve is that I don't want a 5 speed I need a 6 speed sorry I just prefer 6 speeds thanks again

converted my 99 sport sohc to manual. id like to install the cpp because i almost started it into my bench in my garage and it revs like crazy on cruise control. just need to know which wires to hook up and where they are coming from. pictures or links to other threads would be great im stumped...

I have 99 explorer sport with an sohc recently converted to manual with the m50d. Ive tried leaving the solenoids plugged in to fool the pcm but the tranny codes always come back. my question is which model/year fords will have a pcm that will be plug and play? ive been told that a 2001 ranger...

hello my fellow ford lovers, I just converted my 99 sport to manual. I bought the truck for the conversion. everything seems to be good how ever I keep getting the solenoid codes and this wont allow me to past e-test here in Ontario Canada. I just bought a 2004 ranger 4x4 pcm programed for...

Hey Guys and Gals! Long time lurker first time poster! I have a 2002 Sport Trac with a 4.0, 5 speed manual and 4x4. I removed the cruise control components from a 1996 Explorer 4 door 5 speed for my 02 ST. This included the cruise servo, steering wheel and any other associated parts I could...

I have been attempting to repair my power seats in my 2002 Explorer Eddie Bauer Edition. I am really stuck on this and am asking for help. My wife and teenage daughter need to share the car, but the driver's power seat is jammed. The motor so far seems OK - but the seat moves very slowly, and...

I have a 2001 explorer xlt 4 door 4wd with either 3.23 or 3.55 gears I forgot which one. I'm running 33" tires and want more low end. I bought a front carrier from a 2001 ranger with 4.10 gears but it needs the inner axle shaft. Will the one from my original front carrier work? Also, what year...

Winter is approaching fast and I know everyone's Explorer isn't equipped with factory heated seats. However, heated seats aren't very far out of your grasp. I don't have the time to do my own in-depth DIY write up on heated seat conversions, but the following video should suffice. (I ran...

Winter is approaching fast and I know everyone's Explorer isn't equipped with factory heated seats. However, heated seats aren't very far out of your grasp. I don't have the time to do my own in-depth DIY write up on heated seat conversions, but the following video should suffice. (I ran across...

I'm planning my 4wd conversion for january and so far I think I'm going to start with the transmission and transfer case. I plan on ordering a rebuilt 4wd 5r55e and BW 4405. I was going to go with a manual 1354 at first but unlike most people I actually want control trac. Everything seems simple...

Hi guys love this forum only there's something I can't seem to find. I have a 1997 XLT 2wd v6 sohv Explorer and I was wondering if there is anyway to put a solid axle in the front sort of conversion from control arms and all that to a solid axle? I'm hoping its not a 4x4 conversion thanks to all...

My 93 XLT has the dome light in the cargo area, and then 3 up front. (2 switch, 1 door-activated). I wanted to convert these to LED as cheap as possible. I'm not good with circuitry and what resistors are needed, if any. Any suggestions as to LED elements or what parts I need?

Hello all - i'm new to the forum and would greatly appreciate your insights.... Background: My '06 4.0L 4x4 explorer's engine recently bit the dust. The truck is still in great condition and i'm evaluating my options. The engine must be replaced and before the engine died the transmission...

I'm looking to convert my 2WD OHV to 4WD, yeah I know how much easier it is to just buy a 4x4 X instead of going through this process but I really love my truck and I have the money right now to do this. As far as I know I'll need a transfer case, front and rear drive shafts, front diff to match...

Hi. I'm new here and should probably introduce myself in the intro thread. Well, I've been wanting to do something to my X that I just have a hard time finding my question, let alone an answer. Just bits and pieces. So here it goes: I have a 2004 XLS with auto 4x4 and 4.0 v6 engine. I...

I'm looking to convert my 2001 Explorer XLT from MPH to KPH. Does anyone have any idea where I can get the parts required? I've tried contacting my local Ford dealership and they err not able to help me.

So I finally decided to do the swap and it is quite simple and can be done in a couple of days, First off you will need: 4wd transmission and a transfer case. A front and rear axles with all matching gears. Front and rear drive shafts 4wd knuckles and abs sensors. Main wire to connect the...

Hey just wondering if anyone here has seen or done a front end swap from a 01 sport or sport trac to the 07+ (2nd gen) sport trac front end? Is it possible from a bolt on stand point? It seems to me aside from the updated headlights the fronts are almost the same. My plan is to get the 2nd...

Hey guys I'm new to this site and this is my first post. I'd like to convert my 1997 2dr V6 SOHC Explorer 2wd into a 4wd. All I can find online is for years 1991-1994, I want to do the conversion myself and not go through the expensive headache that a shop would give me. I would like to know...

Ok, I'm currently in the research phase and I've been looking up front end swap options for my '91. Idk if I'm doing the wrong search or if nobody has done it before, but I'm looking to swap or convert the front 4x4 with the suspension from a 2nd gen to my 1st gen. Like I said I've done some...

Has anyone tried to put led bulbs in there stock fog lights? If so how is the visibility and are they brighter than the stock halogens? I was thinking something like this...

I hate to beat a dead horse, but has anyone actually installed 44 outers on the 35 inner? I have read plenty of 5 year old posts but am really looking for a simple anwser. I want to install the chevy 44 dust shield with 44 TTB spindle and rotor and I assume chevy axle stub. I cut the brake ears...

Hi all, I saw the thread on the 1959 F-100 and couldn't resist sharing my own similar venture. I purchased an old hot rod 'project' many years ago because I loved the body style. It's a M-47 Mercury, same as a F-47 Ford pick up but slightly different trim and very rare. Problem is the...

I have an opportunity to buy a c4 and 302 combo for 100 bucks. My questions are this. Will the 302 bolt to my transmission? why or why not? If not will the 302 and c4 bolt in with my transfer case and axles?? They are not going to last long. A local four wheel groups president have them...

Okay so I have a 2000 ex 2wd lookin to make it a 4wd. I want to make it a BW 4406 Manual Shift. What Will I need to do the complete swap? :troops: :salute:

Has anyone done it? Brian (slammedXonair) any insite from you on this would be greatly appriciated!!! :notworthy I picked up a 95 Mark VIII as a transplant donor for my 93 Ex the thread for that is here http://www.explorerforum.com/forums/showthread.php?p=2402189#post2402189 So I'm going to try...

I picked up a 2wd 93 Ex 5 spd for some small change I had in my pocket a while back. Its quick being a 5spd 2 door 2wd but I want it to be fast! I've been searching craigslist for the past couple of months looking for a mustang donor car to drop a 5.0L in but around here people think their...

I am getting up the tools and materials i will need to do this. This is the parts list I am going by. if anyone has anything to add let me know! I will do a step by step instructions of what I did. Here is the list of what I am gathering up. sawzall medium to thick metal blade jeep roll bars...

I am converting my 97 Explorer sport to 4x2, i dont have the cash for a new front axle! can I just put rwd spindles, rotors, and abs sensors on it and call it a day. If so where can I find the spindles and from what year do they match with? Thamks for the info in advance. I have looked for the...

I want to do a 302 engine swap into my explorer. I know i am going to need a different transmission. what about transfer case and axles? ive got the xlt 4x4 with manual locking hubs and manual transfer case. I found a guy who has a 302 he has no use for and I can pick up dirt cheap.

Hey all, I've been wanting to put a 4406 transfercase in my explorer for a long time now. Well, yesterday I picked up a manual 4406 from a 98 F-150 with 103k miles. Paid $250 and it included all linkage and the shifter!! got the front and rear driveline from the junk yard and got it all in...