allmyEXes
Elite Explorer
- Joined
- February 6, 2016
- Messages
- 2,416
- Reaction score
- 1,518
- City, State
- No. Alabama USA
- Year, Model & Trim Level
- 1997 Blue Ex 4.0 SOHC
- Callsign
- KAGG 3611 (CB)
I know that the PCM can be reset by disconnecting the battery for a short time to reset and I have been keeping my Scan Tool on the seat of the one that I am driving and reset that way however surely there is a simple way to install a reset button to do this and someone may already have. If any of you guys that have OBD2 experience care to chime in it would be appreciated. I think it could be as simple as installing a normally closed push button switch in one particular wire. Maybe the main power wire for the PCM? It might be a handy feature to reset when little annoying conditions cause the light to come on, reset and be able to replicate the condition to make it come on again. Just an idea and any positive input would be appreciated.
Edited. Start with post #7. Thanks
Edited. Start with post #7. Thanks