4.0 SOHC Metal Thermostat Housing Comparison | Page 7 | Ford Explorer Forums

  • Register Today It's free!

4.0 SOHC Metal Thermostat Housing Comparison




Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Idk big
 




























































I've got 3-years on the Simmons Autosport housing (2010 Explorer) and about 50k miles. No problems, no regrets.
Same here on my 2001 ST. Worth every penny. You get what you pay for.
 






I think it was a 10 mm but don't kno for sure
What did you use on the thread in barb for the heater pipe? i used thread tape and its leaking still
 






.I used gray rtv on everything
 
























Not sure if anyone noticed or posted seeing the aluminum & metal thermostat housings now available on RockAuto, from Dorman (metal) and SKP (aluminum). They were available under the 2 years I looked up 2002 & 2008. Didn't see it posted on here & just thought I'd let anyone know looking into the plastic-to-metal swap that there's another option out there to look at...

Can you scroll thru RockAuto and post up the page with the metal/cast unit the two-sensor version?

Sadly I replaced mine with a Motorcraft version back in 2018 when I did the water-pump & now I see the bottom half has spider-cracking somewhere is changing a shade-of-black indicating it might start to leak... again!
 






Can you scroll thru RockAuto and post up the page with the metal/cast unit the two-sensor version?

Sadly I replaced mine with a Motorcraft version back in 2018 when I did the water-pump & now I see the bottom half has spider-cracking somewhere is changing a shade-of-black indicating it might start to leak... again!

Info was on page 1 post 1 of this thread lol
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Simmons may be able to supply them separately (IDK) but look on RockAuto under a 2002 Explorer for SOHC. They sell the coolant sender and the coolant sensor at various price points. Note that the clips to hold them in place are sold separately. Tip: Put a little Vaseline on the O-rings before inserting them into the t-stat housing.

Link:
2002 FORD EXPLORER SPORT TRAC 4.0L V6 Cooling System Parts | RockAuto

You can get a 5% discount from RA using their discount code in the "how did you hear about us?" box at checkout. Current discount code = 117773113110568785

I tried your link & I don't see part numbers for the TWO clip-in version temp sensors.

Looking at AutoZone:
Grey one- Duralast SU2301


Brown/Red one- Duralast TU330


The top OE connectors, on these clip-on duralast version, look like the same as my 4.0L SOHC but are for the Simmons AutoSports Housing, right?
 






Featured Content

Back
Top