mabupa
Member
- Joined
- November 9, 2013
- Messages
- 46
- Reaction score
- 0
- City, State
- florida
- Year, Model & Trim Level
- 2013 explorer limited
I'm a New member here but, was going through threads and found this one. Here is some info that might help you guys.
I lowered my '13 Limited several months ago using h&r flex springs and then adjusted the upper control arm bolts. Here are some pics of the bolt you have to loosen up to be able to pull it towards you. It won't move much( a couple of mm but it helps). I also attached a pic of my final numbers after alignment. Notice that the left is still out of specs .22 degree which is fine with me. Let me know if I can help with anything else.
I lowered my '13 Limited several months ago using h&r flex springs and then adjusted the upper control arm bolts. Here are some pics of the bolt you have to loosen up to be able to pull it towards you. It won't move much( a couple of mm but it helps). I also attached a pic of my final numbers after alignment. Notice that the left is still out of specs .22 degree which is fine with me. Let me know if I can help with anything else.