Section525 - SAS D44 - Page 2 (Finishing... maybe)

[section525]

Any plans for a rear bumper? It seems like you'd get a ticket for not having one and not having tag lights.

Yeah, I'm totally illegal right now. But here is my rough plan for the rear:

 

[Dannyboy]

trust me on this one, get that plate up higher...or built a 1/4" plate bracket. Love the design on that bumper though.

 

[section525]

Good point. I don't think that plate it to scale either. So it would probably hang down even further in actuality. I'll probably have to re-work it fo sho.

 

[RangerX]

Almost sounds like you live in another country.

It IS another country. It's California! :

 

[Stic-o]

or get a 98+ gate so you can put the plate up there

In fact if you want I have one in perfect condition (different color) that I'll trade you for your current.

then all you need is tail lights

 

[Sams01XplrSprt]

is anyone else going to congrad section for passing smog?

 

[james t]

Dude, congrats for passing smog!!1!


Any tips on ditching the 4wheel ABS bs? Sizes of fittings, lines used, etc? Ive gotta trash this stuff when i start on the hoops.

 

[section525]

It was super easy. I'll post some pics in a bit, but:

I bought three pre-fabbed lines. A 60", 14", and 6" roughly. I used the 14 and 6 on the axle, with a T connecting the two. 3/16" line with American Flare and American Thread. They have American Flare and Metric Thread. No bueno.

I did it just like the pic I posted before.

The shorter line on the pass side and the middle one on the drivers side. I cut the 60" line to go from the MC to just on the inside of the steering box. So that was the only flare I had to make besides the ones on the MC.

So when you take the lines off that go from the MC to the ABS unit, keep both the fittings.

For my rear line, I just bent the one that used to go to the ABS unit, and redirected it into the MC with the original metric fitting.

Pics soon. :

 

[Tbars4]

...I am hoping you post pics and info when you wire and connect your ARB...

 

[james t]

Thanks mucho! I was eyeballing it yesterday and wondering if i could just bend the rear line up to the MC. Sweet.

 

[section525]

Here's a couple pics. I'll eventually get some little weld-on clamps for the hard brake lines and maybe some that'll bolt though one of the diff cover bolts. But this works for now.

EDIT: That shaft in back with the yellow sticker on it is my weed eater. : I was confused too.

 

[section525]

With that big hunk'o'ABS gone, I'll have plenty of room for the compressor in a very convenient location.

 

[Stic-o]

But does it stop?:

 

[section525]

Eventually.

 

[section525]

Got the compressor mounted along with the battery tray. Had to do a little bit of notching to clear the hoop, but its in and works great.

I used all existing holes for the compressor bracket. One from the battery tray, one ABS unit, and one from the old fender skirts. So, no drilling. :

 

[IZwack]

Look at all that room! I could take a nap in there!

 

[section525]

Testing after mounting the compressor. :



There's really not a whole lot of challenge out there. But it's better than drive-way wheeling I guess. Plus its only 4 minutes from the house.

 

[IZwack]

Oh yeah, looks like its ready for Thaven!

 

[section525]

Looks like its time to build a rear bumper.

 

[FROADER]

Yes!!