Something w/ rabbits. 72.5 pages of BS

[IZwack]

Whoa I didn't get an E-mail that people responded to this thread.

Lefy -- the pics of the old setup is in the first SAS' photo album:
http://www.explorerforum.com/photopost/showgallery.php?cat=3500


About 70% done with the front. Setting up the gears on the D60 is going to be a royal PITA cauz as it is now, my weak little arms can barely lift it.

I switched to a 2.5" hydraulic cylinder (the old one was a 2.0") just in case Godzilla tries to steer my Explorer.

 

[Rick]

Dang IZ, you're moving right along! Looking good!!

 

[kert0307]

Holy panhard bar batman! Keep up the good work. We use Surplus Center for stuff all the time for our prototype parts as well.

 

[iammattchew]

every time I come back to this thread i drool a little more...

 

[94 Crawler]

when in doubt over build

Iz you keep it up and you will be finished befor my simple sas. (Darn I'm a slacker)

 

[IZwack]

Thanks guys.

I can't wait to get the front suspension done and move on to the rear (which should be a lot more simple)

 

[JTX]

Thanks guys.

I can't wait to get the front suspension done and move on to the rear (which should be a lot more simple)

IN! Thanks for the chance!

 

[IZwack]

Ah WTF, get these hijackers out of here -- JTX, you belong in heaven. :

 

[fischerry]

alright Iz, were waiting...

 

[IZwack]

Sorry no update for a while -- I was at Truckhaven last weekend and a family emergency has come up so I wont be updating for at least another week or so.

 

[JTX]

Change in 2008 is what we need!

 

[IZwack]

LOL okay okay, I'll bring change: JTX you're banned :

But can someone with a 4dr 2nd gen please measure the frame width at about the location below? I guess outside of rail to outside of rail measurement. Doesn't have to be precise, closest to half an inch will work.

 

[91exploreron37]

I just went out to my moms 4dr 2 wheel drive 2nd gen and its about 2 3/8in wide.

 

[BKennedy]

I just went out to my moms 4dr 2 wheel drive 2nd gen and its about 2 3/8in wide.

I'm guessing you are missing a few feet in there somewhere. He wants the entire frame width, not the frame rail width.

 

[IZwack]

I'm guessing you are missing a few feet in there somewhere. He wants the entire frame width, not the frame rail width.

Yep-- from outside of one frame rail to the other. The guy who's daughter changes his avatar on a day to day basis has it right

It should be around 36 or so inches from what I can remember...

 

[Turdle]

33"

 

[IZwack]

Thanks JT!

 

[Turdle]

that was about 5" toward front of torsion key location, if you remember what those thingys are-

 

[IZwack]

..torsion key location, if you remember what those thingys are-

I had to look it up..


j/k

 

[91exploreron37]

I'm guessing you are missing a few feet in there somewhere. He wants the entire frame width, not the frame rail width.

Haha woops