bt1987
Active Member
- Joined
- June 8, 2018
- Messages
- 56
- Reaction score
- 3
- City, State
- Columbus, OH
- Year, Model & Trim Level
- 2014 Ford PIU
I have been doing lots of research on the Fog Lights in the 11-15 Explorers, and I have found an option to enable the Fog Light indicator on the dash. The information I have states the following:
IPC 720-01-02
xxxx x8xx xxzz to enable the Fog Light Indicator
xxxx x0xx xxzz to disable the Fog Light Indicator
Well that doesn't work on the PIU... The bit at that address, when increased to 8 (or anything other than 0) gives me error messages about Collision Avoidance, Blind Spot Monitoring, etc.
Who has successfully activated the Fog Light dash indicator on a PIU? I suppose I could continue doing what I was doing to enable Remote Start and the Locks Menu. The information online for Remote Start says to use C8F3 to enable the Remote Start menu. That absolutely doesn't work for the 2014 PIU. I had to go bit by bit and compile a chart to see what the options were, and came up with 80EA in order to add the Locks menu (my default was 800A). Then to add remote start, I had to move to the next address. The second block, originally 0000, I had to go through and change to 00C0 to activate the Remote Start. So clearly, I've had to completely change two blocks of data instead of one, and the one I changed was nothing like what was suggested.
Does anyone have the code to activate the Fog Light indicator? Thanks
IPC 720-01-02
xxxx x8xx xxzz to enable the Fog Light Indicator
xxxx x0xx xxzz to disable the Fog Light Indicator
Well that doesn't work on the PIU... The bit at that address, when increased to 8 (or anything other than 0) gives me error messages about Collision Avoidance, Blind Spot Monitoring, etc.
Who has successfully activated the Fog Light dash indicator on a PIU? I suppose I could continue doing what I was doing to enable Remote Start and the Locks Menu. The information online for Remote Start says to use C8F3 to enable the Remote Start menu. That absolutely doesn't work for the 2014 PIU. I had to go bit by bit and compile a chart to see what the options were, and came up with 80EA in order to add the Locks menu (my default was 800A). Then to add remote start, I had to move to the next address. The second block, originally 0000, I had to go through and change to 00C0 to activate the Remote Start. So clearly, I've had to completely change two blocks of data instead of one, and the one I changed was nothing like what was suggested.
Does anyone have the code to activate the Fog Light indicator? Thanks