3800 M90 Build

[jd4242]

$70.00's Pretty cheap. Then add the cost of possible rush shipping each way. Ugh.

ODB1...is the computer code a 4 digit code inside your drivers door? I have no idea how one would read it with some kind of a code reader.

O its going to be a couple weeks before i even send it to them.and a couple more till i do the install.i would say January .i still have to get the pump and i think im just going to wait till i can afford the new charger and new pullies .so i just do the install once.i also wanna put a stock set of rockers and rocker spacers in wille i have it apart.

 

[jd4242]

And no there is a code on the actual computer that he needs

 

[phix-]

Tell you what, if your interested I have either a 73 or 76mm C&L maf from my old setup. I can even include the stock maf, age: 4yrs. Let me know. Though I just read this entire thread and boy january can't show up any sooner, huh?

 

[jd4242]

Tell you what, if your interested I have either a 73 or 76mm C&L maf from my old setup. I can even include the stock maf, age: 4yrs. Let me know. Though I just read this entire thread and boy january can't show up any sooner, huh?

Hell yea i can't wait.you have any pics of your m90 setup?what size injectors did you go with?

 

[Dono]

And no there is a code on the actual computer that he needs

Do you have any idea how to get the code?

I just remembered that someone here said the odb2 engine program code is stamped an the label on the drivers door. James said he just didn't like to use it since the dealer may have upgraded the software at some point.

 

[jd4242]

I believe that have to put the same sticker on the computer but not sure.i don't think i have one on my door and if i did the door is from the junkyard anyways so.

 

[jd4242]

here is some pics of the old setup

 

[jd4242]

injectors are bought now,went with 36lbs
http://www.ebay.com/itm/300543047610?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

 

[jd4242]

question about the fuel pump,is 190lph going to be enough or should i get the 255lph?and they offer two 255,one is high pressure and one is not

 

[jd4242]

ok went with the standard pressure 255lph,figured it couldn't hurt to have the extra flow
http://www.redlinemotive.com/part-number/walbro/gss307-400-812.asp

 

[Dono]

Looking at the M90 mounting plate, it looks like its only about an 8th inch thick. Doesn't look good for me and the M90.

Im sure you have been told the tune can dial in the 36 pounders, so no issue. Oh man, hows the rest of your drivetrain for strength? Wow.

 

[jd4242]

Looking at the M90 mounting plate, it looks like its only about an 8th inch thick. Doesn't look good for me and the M90.

Im sure you have been told the tune can dial in the 36 pounders, so no issue. Oh man, hows the rest of your drivetrain for strength? Wow.

There has to be more under that plate for sure haha.umm im sure my trans will be gone but i built it with a stage two so its been doing pretty good.i plan to rebuild it with a stage three or replace with a 5speed.rear end is good to go

 

[Dono]

What a great hobby!
Hope your right on the plate. I found a high volume returnless style fuel pump and the ford racing blue 24 pounders will be good for me.

Your well on your way. Im sure you can do the fuel pump as soon as you get it. That one will probably be the messiest unless you go from the top anyway.

 

[jd4242]

Shouldn't be no problem.i just dropped my tank to put my air tank in so.yep got everything i need now.just waiting till next week to get the new charger

 

[Dono]

you have a egr valve JD?
I kinda doubt it, but....

 

[jd4242]

you have a egr valve JD?
I kinda doubt it, but....

Nope no egr .going to fill the hole and smooth it out

 

[Makahveli]

$70.00's Pretty cheap. Then add the cost of possible rush shipping each way. Ugh.

ODB1...is the computer code a 4 digit code inside your drivers door? I have no idea how one would read it with some kind of a code reader.

Wrong!!! LOL The code is located on your ECM inside the passenger kick panel (inside your explorer!) My code is X2X2. This is also the same component you attach your chip too!!!

 

[jd4242]

Wrong!!! LOL The code is located on your ECM inside the passenger kick panel (inside your explorer!) My code is X2X2. This is also the same component you attach your chip too!!!

That's what i thought.yea think i made right decision on 36lbs and 255lph pump

 

[Dono]

thanks Makahveli!

 

[Makahveli]

Dono does the electric fan make a big difference? It would be the only power adder I believe I have left?!?!?