Sweet! We're building a small army of G2 users here now.
Not sure if you've watched any videos or done a ton of research or not, but just in case let me stress that prepping is hugely important. The better you prep, the better the results. Also, don't be discouraged after the first coat. It's going to look bad. Brush strokes will level out (self leveling paint) and the color will get much richer on the second and (if wanted or needed) third coats. I had enough paint left for probably a fourth coat, but three looked great. Dirt just sprays off easily with this product.
Like I said, not sure if you've done much research or not, but this is a pretty informative video and it's actually what talked me into doing mine (seeing the orange calipers with a black vehicle.) Plus Mike is a great guy.
Sure, here's a link to the YouTube video illustrating the install:
And a link to amazon for the actual product:
https://www.amazon.com/dp/B015G3QXMY/ref=cm_sw_r_cp_apap_hiw5UpZtX2EGU
What color did you get?
I went with the orange. It's close to the shade of orange on the old school HEMI engines. Here is a pick of my calipers on my Charger
View attachment 95609
Looks good man!
I went with the orange. It's close to the shade of orange on the old school HEMI engines. Here is a pick of my calipers on my Charger
View attachment 95609
Orange was an excellent choice if I do say so myself.I went with the orange. It's close to the shade of orange on the old school HEMI engines. Here is a pick of my calipers on my Charger
View attachment 95609
I went with the orange. It's close to the shade of orange on the old school HEMI engines. Here is a pick of my calipers on my Charger
View attachment 95609
Nice! I'm thinking about red. On the sides, everything is black, white, or red, so I think it will tie in nicely. I could also go blue or orange to tie into my Gators tag and license plate frame, but I don't think I'd like those as much. It's going to be red or black, and I don't see much point in black.
That actually looks pretty cool, not to be a spoiler but be careful if it's sitting in the airbag deploy zone. If you are unfortunate enough to get hit the airbags turn that iPad into a guillotine.
Years ago Panasonic did a demo showing why Police need to buy their ToughBooks over a regular retail consumer laptop. I saw their airbag demo that showed a consumer laptop screen blown back through the rear window.
BTW.....get some vinyl conditioner on those seats and console they look like they need some loving care! LOL!
Sweet! We're building a small army of G2 users here now.
Not sure if you've watched any videos or done a ton of research or not, but just in case let me stress that prepping is hugely important. The better you prep, the better the results. Also, don't be discouraged after the first coat. It's going to look bad. Brush strokes will level out (self leveling paint) and the color will get much richer on the second and (if wanted or needed) third coats. I had enough paint left for probably a fourth coat, but three looked great. Dirt just sprays off easily with this product.
Like I said, not sure if you've done much research or not, but this is a pretty informative video and it's actually what talked me into doing mine (seeing the orange calipers with a black vehicle.) Plus Mike is a great guy.