Well guys been super busy and had parts to do this sitting around for awhile. Fortunately enough my timing cover gasket went from no leak to straight peeing in a 2 mile drive recently. Here is a few notes and parts I used, I'll add part numbers and update original post wen done...
-Comp Cams 35‑349‑8 Xtreme Energy Cam
-Alex's parts gt40p springs
-Alex's parts 6.305 extended pushrods (figured this out after cam was installed and stockers are WAY too short)
I already had a few supporting mods along with 1.6 roller rockers and roller timing chain setup on the truck when it was built. Put about 15k hard miles on her in 2 years and she sure needed a little cleaning.
-Comp Cams 35‑349‑8 Xtreme Energy Cam
-Alex's parts gt40p springs
-Alex's parts 6.305 extended pushrods (figured this out after cam was installed and stockers are WAY too short)
I already had a few supporting mods along with 1.6 roller rockers and roller timing chain setup on the truck when it was built. Put about 15k hard miles on her in 2 years and she sure needed a little cleaning.