For the mirrors with puddle lights that I found on ebay at a good price luckily. My main question is that with my ex not having puddle lights from the factory, if I buy the power mirrors with puddle lights is there an extra wire that comes on the harness on the mirrors with puddle lights for the puddle lights to get power? Or do I need to plug in the new mirror with puddle lights to my Ex then splice a wire to the interior lights for the puddle light to work? Hope that made sense, thanks to anybody that has the info on this.
So I have a quick question, my side mirrors dont have the puddle lights below them, but if I wanted too, could I buy some with the puddle lights and swap them out? Like would the cable that plugs into the mirrors for the power mirrors also be the same cable for the puddle lights?
in my experience of trying to add equipment that was not installed from the factory is that you will need to run your own wiring. I have never been blessed with an OMG IT JUST PLUGS IN project... Ever.
Ahhh I see. That saddens me
Another question. Is the only way to separate the puddle lights clear piece from the black piece is to just dremel it?
Posting my results...
Here's what it ended up looking like. This was my first time soldering besides a few wires I practiced on. I was very happy with the results.
stupid question but i'm guessing their aren't any LED bulbs available to just swap put with the stock puddle ones?
Could this be done with SMD leds? if so would type of resistors would they need. for say 5050smd.
Thanks