Techieman33's Elite Registry

[MountaineerGreen]

How is your alignment and tire wear? It looks like you may need some lower ball joints, but that could be from how its sitting.

Lights look good though

 

[techieman33]

I really like the lights behind the grill. Can you legally drive with those on? Here in WI you can only have 4 bulbs lit at a time.

I'm not to sure about the legality of having all 6 lights on at the same time, I probably need to look into that, I could always just turn the fog lights off.

How is your alignment and tire wear? It looks like you may need some lower ball joints, but that could be from how its sitting.

Lights look good though

My alignment is ok, my tires wear sucks though because I drive it to hard around corners.

 

[techieman33]

Crossed over the 100k mark, at 100mph no less

 

[TeckNine4]

I'm not to sure about the legality of having all 6 lights on at the same time, I probably need to look into that, I could always just turn the fog lights off.



My alignment is ok, my tires wear sucks though because I drive it to hard around corners.

Don't Roll it bro :roll: Everyone said I was gonna flip it when I got it, switching from a Maxima, I drove fast around corners. I know for sure ive had my Expo on 2 wheels more than once.

 

[techieman33]

About a week and a half ago I started hearing a noise while braking, so I checked them out and this is what I found

Yeah, the pad was gone, it was pure metal on metal.

All is well now, It's powerslots and hawk pads all the way around

All I can say is wow, what a difference. I got cut off today getting on the interstate and had no choice but to get on them hard, and they stopped me fast, If I still had the old brakes, I know I would have hit her.

And I needed a new battery so I dropped this in

 

[Donner]

Excellent! Dang bad@ss kids tearin' up your brakes Are you going to paint the calipers?

 

[techieman33]

Excellent! Dang bad@ss kids tearin' up your brakes Are you going to paint the calipers?

Paint? now why would I do that, when I could get Jtsmith to powdercoat a set for me. Now that I've decided not to lift it, I plan on getting some 18's in the future, so I'll want everything under there to look nice.

 

[Donner]

Nice to hear!

A lift with 18's? Is there a ps to look at? I'm not sure i've seen that combo before... sounds sweet!

 

[techieman33]

Nice to hear!

A lift with 18's? Is there a ps to look at? I'm not sure i've seen that combo before... sounds sweet!

I'm not lifting it, I just haven't decided if I want to lower it a little 1-2" max, or keep it at stock height.

 

[Donner]

Got it... didn't see the "not" first time. Drop it a couple inches, won't hurt... Do a photoshop...

 

[Dan Whitaker]

Paint? now why would I do that, when I could get Jtsmith to powdercoat a set for me. Now that I've decided not to lift it, I plan on getting some 18's in the future, so I'll want everything under there to look nice.

I doubt you can powder coat the calipers because of the rubber boot that is between the piston and caliper.

 

[techieman33]

I doubt you can powder coat the calipers because of the rubber boot that is between the piston and caliper.

All of the internal parts pop out, and you can buy a rebuild kit for the calipers for around $13

 

[MountaineerGreen]

Did you clean/lube your caliper slides? If your pads were worn unevenly, your new pads will also. Nice rotors and pads though!

 

[techieman33]

It now has 4.10 gears, rock crusher diff cover and some fresh paint under the rear suspension. It finally launches off the line instead taking it's time until it hits 20+mph. Here are some pics and a burnout video

link to gear install http://www.explorerforum.com/forums/showthread.php?t=217756

And I couldn't leave out the cool poser flex shots that always seem to be so popular

 

[Turdle]

You forgot the " pose" shot. You know which one I am referring to-

The one with you standing in the road--

 

[FROADER]

This one? Oh wait, you said standing...

 

[techieman33]

This one? Oh wait, you said standing...

no he's talking about this one, I didn't think it turned out so well, sams pimp pose is just so much better than mine

 

[techieman33]

Here's a little update, the real one will be in the next week or so when I get everything else done. I still need to lower it and have some different shocks for the front but I'll wait to do that until I get back to Topeka, There have just been way to many horror stories about alignment problems down here in humboldt. It also needs a bath pretty bad

 

[techieman33]

It took me longer to get to this update than I was planning on but here it is. I finally got around to giving the mouty a bath the weather just hasn't been cooperating with me.

Close up of the wheels and the powder coated calipers by Jtsmith

And the rear suspension stuff that he coated for me

Now I'm just waiting the get the stuff to lower it from Jon

And here's some things you can expect to see in the coming weeks

 

[CDW6212R]

Very good Eric, and what are the little green lights on the console? I need to find a pair of shackles and perches to clean up for mine. I have a left rear shock that the bolt is seized in the perch(one red shock and one yellow shock).