034x4's D44 SAS thread...

[034x4]

Ya I might keep the leafs. I still need longer shackles so the leafs will flatten out more.

Buy me a new camera, no one else *****es about my camera phone, ***!

 

[RangerX]

Looks great! You should paint the whole truck that green that's on the axles.

 

[RockRanger]

Nice. Chevy lowering shackles will bolt right in to the ranger hanger. Thats what I am using. That flex is pretty nice. Now hurry up and get some fenders on that thing. And get a real camera, the one on the phone sucks There someone else besides supergildo complaned j/k

 

[034x4]

Looks great! You should paint the whole truck that green that's on the axles.

Ya it would look good, but I think your a little biased on the subject lol.

Rockranger, don't talk about my camera phone. Show me a digital camera that you can play games on and talk to other people on ha.

 

[JS91X]

well i gotta know how the turning is with 4 wheel and the spool and hydro assist after your wheeling adventure....

 

[supergildo]

And get a real camera, the one on the phone sucks There someone else besides supergildo complaned j/k

YES!!!!!

Rockranger, don't talk about my camera phone. Show me a digital camera that you can play games on and talk to other people on ha.

my Ipod play games and it shows ALL of my pics...


+ music, + videos...

 

[jasonb]

but does it take pics?

 

[034x4]

No, which is exactly why my phone is better!

 

[034x4]

well i gotta know how the turning is with 4 wheel and the spool and hydro assist after your wheeling adventure....

When I was messing around in the back yard with the hubs locked in 4-lo iht had no problem turning. The front end did push a little but thats expected with a spool and detroit. The hydro assist made it easy to turn. About the same effort it takes to turn it on the street. Even on the concrete slab it wasn't very hard to turn it.

 

[034x4]

Just a quick update to a pretty much finished swap.

Put on my new exhaust manifold (thanks zainyd) and my new rear diff cover (thanks jasonb).

Welded in 1/2" grade 8 bolt for the ultimate seal strength lol. (this manifold has EGR, mine does not so I had to plug that shiat).

Nice crack.

Do you like beefy pumpkins?

 

[Burns]

how is your hydro assist set up because that is a option for me but i need to see if it is street legal

 

[mynameisaric]

too many people are looking at your pictures, and now no one gets to see them.

on a side note, my front bearing hub(pasenger) just went out today, but mine didnt explode like yours. I on the other had didnt happen to have a d44 laying around so i had to replace rusty crap IFS with remanufactured/brand new crap IFS.

 

[034x4]

Hydro assist is street legal because there is still a mechanical link b/t the steering wheel and the axle.

It's a "new style" 'yota IFS box drilled and tapped with a PSC 8" travel ram mounted on top of the chunk and on the tierod.

lol Aric, sorry to hear that. Maybe next time you'll have a d44 laying around.

 

[IZwack]

It's a "new style" 'yota IFS box drilled and tapped with a PSC 8" travel ram mounted on top of the chunk and on the tierod.

interesting!! pics would be nice

 

[034x4]

I know there are some in the ~25 pages of this thread but from what people are saying I don't know if they work, so here are some links to the pics.

Ram with tabs welded onto tie-rod.
http://img.photobucket.com/albums/v723/034x4/18bff3a7.jpg

Lines hooked up on the box.
http://img.photobucket.com/albums/v723/034x4/b1678b44.jpg

Tabs welded on diff and ram installed.
http://img.photobucket.com/albums/v723/034x4/47089e53.jpg
http://img.photobucket.com/albums/v723/034x4/385179de.jpg

 

[IZwack]

oh yum!

 

[Burns]

thanks that really will help me decide how i want to go about mine

 

[nappahdog]

how did you change your pinion angle? by grinding the welds off the "c's"? the reason I ask is I have an 86 waggy d44 & a 98 ranger


my last ? thx

 

[034x4]

Well all you have to do to change the pinion angle is set the angle of the spring perches.

I corrected the caster angle that was a by product of the pinion angle being changed by turning the knuckles. Grind the welds off, beat the knuckles to the desired angle then re-weld. They are cast so you have to weld them differently.

 

[JS91X]

so basically your saying that when you changed you pinion angle you had to turn the inner Cs so the knuckles are flat...right