034x4's D44 SAS thread...

[JS91X]

hows the truck and other stuff ? bout time this thread has an update

 

[034x4]

I blew up my d44 R&P yesterday wheelin the 42's lol. I'll post some carnage pics this evening.

 

[bmxking5]

eww cool. So is it getting new gears or a set of rocks?

 

[JS91X]

where da pics at ?

 

[supergildo]

he didnt end up splodin the r&P, he broke the pinion flange and stripped the splinage on the pinion shaft...

 

[bmxking5]

Oh ok.... do they have heavy duty pinions for the LP 44 like they do with the 9"? (You can buy a "pro" pinion, or something like that, that's 35 spline as opposed to 28 spline)

 

[IZwack]

I think all D44 pinion shaft diameters are the same (and same spline count).

But wow to strip a pinion shaft requires quite a bit of torque! I'm surprised the transfer case or the axle shafts didnt break before.

One question, are the axle shafts stock? Or are they aftermarkets?

 

[034x4]

I have yukon chromo's and ctm's in the front and superiors in the rear.

 

[IZwack]

I have yukon chromo's and ctm's in the front and superiors in the rear.

Gotcha thanks.

Wow so the input flange cracked - amazing

 

[034x4]

Pshopped some exo designs in about 5 minutes lol.

 

[IZwack]

So its a full-on truggy eh?

Are you still running that kind of 3/4 elipitical leaf spring design?

 

[sn0border88]

combine the last 2 designs and your lookin badass.

 

[FROADER]

A yota with some ok ideas. http://www.downeastoffroad.com/toyotapropage.htm

 

[034x4]

So its a full-on truggy eh?

Are you still running that kind of 3/4 elipitical leaf spring design?

Yup.

What i'm planning on doing is using this design in the rear

and cutting the frame off right after the pivoting shackle mount-hanger. I'll have 2 tubes that come off the back of the exo and act as the bumpstops for the shackles for now, so when I get rocks' and 4-link it I'll be extending the wheelbase slightly and I can just chop those 2 tubes off and have a 90*+ departure angle.

 

[034x4]

Well i'm not dead, if anyone was wondering.

Sold the 42's. They were too big for the truck (rubbed EVERYTHING up front).
Just got back from river rock, my doors are all beat in.
You can see the pics here http://www.aimoo.com/forum/postview.cfm?id=651605&CategoryID=427418&startcat=1&ThreadID=2628417

The end of this month I will be doing another ranger SAS for a member of another board, and in return be getting some tubing for an exo, so that should start soon there-after.

 

[RockRanger]

You still coming to cali for fab school?

 

['97 V8]

Well i'm not dead, if anyone was wondering.

Sold the 42's. They were too big for the truck (rubbed EVERYTHING up front).
Just got back from river rock, my doors are all beat in.
You can see the pics here http://www.aimoo.com/forum/postview.cfm?id=651605&CategoryID=427418&startcat=1&ThreadID=2628417

The end of this month I will be doing another ranger SAS for a member of another board, and in return be getting some tubing for an exo, so that should start soon there-after.

busy busy. Its good to see your still alive

 

[034x4]

You still coming to cali for fab school?

Yep, hopefully around january.

 

[034x4]

Pretty good paint job for a ~4-5 hour job from start to finish. Rattle can .

 

['97 V8]

dude that looks so bad ass. I cant wait till may!